Meowl Cowl

Meowl Cowl
Size Medium

First off; yes, I realize that I totally shouldn't name any of my knitting patterns after a joke in the movie Super Troopers, but - hey meow, sometimes, once the name appears in your head, you just can't shake it. Anyway, in this particular case, it seemed reasonably fitting. The yarn itself has a bit of tortoise shell/bird feather thing going on, for one thing, and the long slipped stitches also create a curvy zigzag pattern that somehow reminds me of a cat's claw. All of that aside, this is also a fun-to-knit, unisex pattern that's good for kids and grown-ups alike!

Sizes: Small (Medium; Large) (in general, small is for children or teens, medium for teens or adults, and large for adults who want a less snug-fitting cowl)

Yarn: A Secret Stash Ninja DK (100% Merino; 255 yards [233 meters]/100 grams); Ebony & Ivory - one skein (one skein; one - two skeins)

A better look at the long
slipped stitch pattern. Zig-zaggy, no?

Needles: one 16" circular needle in size US 6

Notions: Tapestry needle, stitch marker

Gauge: 24 stitches = 4 inches in stockinette

So let's get started! First, then, cast on 108 (126; 144) stitches loosely, place marker, and join in round. Then we'll knit a few set-up rows, as follows. To do this, we'll need the following notation:

fisherman's rib stitch (frs): knit next stitch in stitch below, slipping right-hand needle into stitch and then between the two stitches looped around the back of the stitch, such that you're knitting both the stitch on the needle and the top loop (see video below if this seems confusing)

Rock That Selfie Cowl

Rock That Selfie Cowl
in the farmer's market at Bürkliplatz

Okay, I'm scared I'm going to forget to tell you all of the relevant information about this cowl if I ramble on too long beforehand, so let me skip the intro and go straight to the details. First off, then, I made this cowl with a 120 gram bundle of 6 mini skeins; often, mini skeins come in 100 gram bundles with 5 skeins and if you have one of those that's okay too! You can still use your bundle to make this cowl, you'll simply have two fewer stripes (but since mine measures over 14" long I promise yours will still have a decent length too!). Secondly, I made this cowl top-to-bottom, because I wanted my gray yarn to be nearest to my face. You can make your cowl top-to-bottom or bottom-to-top, as you prefer, but I highly recommend finishing the TOP end with the i-cord bind off and the BOTTOM end with the picot bind off, since it spreads more and I personally prefer that spread towards the bottom. And third, this cowl is a perfect choice for scrap yarn if you don't have minis, and the basic design makes it a perfect choice to adapt for different weight yarns - so if you have any questions in that vein, just hit me up in the comments! :)

Oh, and yes - I did selfie for all of these pictures myself (it's such a nice pop of color for a picture!)... but with a friend in tow, so everyone we passed very clearly thought I was a lunatic who refused to ask for help with my photos!!!

Yarn: Martin's Lab Mini Bundle (100% Merino; 6 mini skeins of {80 yards [73 meters]/20 grams}); gray (color A), pink (color B), purple speckled (color C), green (color D), dark purple (color E), and periwinkle (color F)

You can see the i-cord bind off
on top and the picot bind off on
bottom... and the Limmat
in the background!

Needles: one 16" circular needle in size US 3, one needle in size US 2 or 3 (for i-cord bind off; smaller size is recommended), and one needle in size US 4 (optional, for provisional cast on)

Notions: Tapestry needle, stitch marker, roughly 3' of scrap yarn for provisional cast on

Gauge: 28 stitches = 4 inches in stockinette on size US 3 needles

So let's get started! Using your color A yarn and your larger needles, if required (otherwise your size US 3 circular is fine), cast on 155 stitches provisionally. Then, if you used a larger needle to cast on, transfer stitches to your size US 3 circular, and in both cases place marker and join in round. Knit twelve rows, including your provisional row in that count, and then begin the striping pattern, as follows:

Rows 1 - 12: using your color B yarn, knit

Rows 13 - 24: using your color C yarn, knit

Reflecting Pool Cowl

Reflecting Pool Cowl

There's no denying it: this is one of those yarns that I bought because my raccoon brain demanded it (okay fine, maybe raccoon isn't accurate - it's not shiny although it's colorful. You get what I mean). And, as always with these yarns, as soon as I got it home I wondered what to do with it - with a variegated I prefer a pattern that's not too plain but that also doesn't get eaten by the colors of the fiber, after all. Luckily it didn't take long before I came up with this cable and openwork design, which shows off both the texture of the fabric and the beauty of the yarn. And, as a side note, I think it would also work well on larger needles (US 8 or even larger!) if you want a more drapey look. :)

Yarn: Lang Yarns Riva (52% Cotton, 48% Acrylic; 115 yards [105 meters]/50 grams); #0079 - 2 skeins

A look at the cable and the
openwork design.

Needles: one 16" circular needle in size US 6 (4.0 mm), cable needle (cn) or dpn for cabling

Notions: Tapestry needle, stitch marker

Gauge: 19 stitches = 4 inches in stockinette, 22 stitches = 4 inches in pattern

Okay, let's make a cowl! First, then, cast on 110 stitches loosely (or 121, 132, or any multiple of 11 if you'd like a looser-fitting cowl - this one clocks in at only 20" around unstretched), place marker, and join in round. Then we'll work a combination of Vandyke Faggoting from page 187 of Barbara G. Walker's A Treasury of Knitting Patterns and a basic chain cable, as follows. You'll need the following notation to continue. Remember you can always cable without a cable needle, if you'd like.

back cross (bc): transfer next 2 stitches to your cn and hold in back; k2, k2 from cn

front cross (fc): transfer next 2 stitches to your cn and hold in front; k2, k2 from cn

A Is For Ascot

A is for Ascot - toddler size

Oh man, this is a project that I finished quite some time ago, but then I couldn't photograph and post it because my wild third child didn't want to get in front of the camera to model. And, of course, as soon as I FINALLY snapped these pics he also let me cut his hair, which makes him look like less of a goober than he does in these photos. However, his gooberness aside - this is a fun cowl/scarf project that's perfect for a kid who keeps losing his or her scarfs (since there's a slit in one end and the other end tucks in!). It will also, adorably, make your child look ever-so-slightly like a sailor. :)

Sizes: Toddler (Child)

Yarn: Lang Yarns Mille Colori Baby (100% Virgin Wool; 208 yards [190 meters]/50 grams); #0050 - one skein (one to two skeins)

Could I have put him in a less
colorful shirt? Probably, but then
he would have been screaming.

Needles: One set of double pointed needles (dpns) in size US 4; one needle in size US 5 for provisional cast on

Notions: Tapestry needle

Gauge: 27 stitches = 4 inches in stockinette on size US 4 needles

And now that we've gotten that taken care of, let's make an ascot! First, then, using your size 5 needle, cast on 40 (48) stitches provisionally. Transfer to 3 of your size 4 dpns, distributing the stitches as follows: 20 stitches on your first needle, 10 stitches on your second needle, and 10 on your third (24 on your first; 12 on your second, 12 on your third). Join in round. Knit in stockinette until piece measures roughly 6" (7"), at which point we'll knit one decrease row, as follows. Notice that the rows are different for the two different sizes.

Decrease Row - toddler size: [(ssk, k1) three times, k2, (k1, k2tog) three times] twice (28 stitches)

Decrease Row - child size: [(ssk, k1) three times, k6, (k1, k2tog) three times] twice (36 stitches)

Quatrefoil Cowl

Quatrefoil Cowl

What can I say about this yarn? The minute I saw the color I KNEW I HAD TO HAVE IT, even though this yarn weight (worsted) in a mostly-cotton blend can be hard to design for (Why? Because lace isn't very crisp in this weight, the lack of stretch compared to wool makes it less ideal for cables, etc). So I had to play around with a few patterns before I came up with something I liked, but I enjoy the way this combination of a picot hem and a basic eyelet design creates a feminine, but not overly girly, aesthetic. Of course, just because I used a mostly-cotton fiber doesn't mean you're stuck with that choice; this design would look equally good with wool, and would probably even take the right variegated yarn as well... 

Oh, and before I forget - special thanks to my friend Nikki at Zender Studios for helping me with the pics! :)

Yarn: Lana Grossa 365 Yak (66% Cotton, 12% Yak, 22% Polyamide; 159 yards [145 meters]/50 grams); #004 - 2 skeins

A better look at the eyelets.

Needles: 16" or 20" circular needle in size US 9

Notions: Tapestry needle, stitch marker

Gauge: 18 stitches = 4 inches in stockinette

So let's make a cowl! First, then, we're going to start with a picot hem. You can find tons of tutorials for this online if you need extra help, but I'll walk you through the steps here as well. So, to begin, cast on 96 stitches loosely, place marker, and join in round. Knit five rows around. Then, work the following row: